TECHNICALLY FEASIBLE & COMMERCIALLY VIABLE SOLUTIONS FOR THE
VARIOUS POLLUTION CONTROL & CHEMICAL PROCESS EQUIPMENTS.

ABOUT US

Our Products

ENQUIRY

Products

Air Pollution Control Equipments

Flash Dryer

Dust Extraction System

Fumes Extraction Systems

Spray Dryer & Chemical Process Equipments

Home » Flash Dryer

Flash Dryer

Yansons Engineering Pvt Ltd is the first company in India to install the flash dryer plant to remove the moisture from the wet ash and also remove the foreign materials from the wet ash.

YEPL has successfully engineered and installed 100 TPH dry ash output plant at Shree Cement Ltd Beawer with 15% initial moisture in wet ash. We are engaged in exporting of moisture dryers, waste removal devices, flash moisture dryers etc.

The specification sheet of the 100 TPH plant is given below.

Technical Flow Diagram for Flash Dryer

Request a quote

Feed Specifications
Material to be handled	Pond Ash
Concentration of moisture in feed	15%
Feed temperature	30°C

Typical Operating Parameters
Type of flash dryer	Pneumatic Conveying type flash dryer
Dryer inlet temperature	450°C
Dryer Outlet Temperature	110 °C
MOC	Carbon Steel
Moisture evaporation rate	18000 kg/hr
Final Moisture required	1% maximum
Dry powder output rate	100 T/hr
Fuel used	Available heat source of Hot gases
Hot gas required	3,20,000 m3/hr at 450°C
Dust Emission level at the exhaust	20 mg/Nm3
Total connected electrical load	725 Hp
Drying cost	4.5 Kw/Ton of dry ash

Our Products
Air Pollution Control Equipments	Flash Dryer	Dust Extraction System
Fumes Extraction Systems	Spray Dryer & Chemical Process Equipments