Fumes Extraction Systems

When fumes (small quantity of harmful liquid vaporizes and gets mixed with ambient air, it is called fumes) are found in atmosphere, they tend to harm living and dead. We are engaged in manufacturing of fume extraction system, fume collection system etc.

• Effect on life, be it human or animal. It affects skin from outside and lungs from inside when inhaled. Trees and leaves, vegetation get effected by losing color and life.
• Metal gets corroded and spoiled losing strength.

Suitable design of systems is available for treating fume led atmosphere and for bringing down fume contents. Following are the equipment used for the purpose:

Hoods, Ducts & Valves
For handling corrosive gases ,however light, FRP, PVC or PP material are normally used. Designs of hoods and ducts are critical since they decide the efficiency of the system. Hoods are mounted on the source and its design matters for getting maximum gases out.

Scrubbers

Technical Flow Diagram for Scrubbers

This device washes the gases with solvent ,which can dissolve the fumes and release free air for discharge. This is normally made suitable to gases concerned.

Fans
This device pulls gases out by giving negative pressure in the system. Depending upon usage, material of construction is decided. It could be plain mild steel or coated, FRP, S.S. or any other material.

Packaged System
Specially in India, where there are more than 50,000 small scale units, each unit owner is needs a system with following properties:

• It should be economically affordable
• It should occupy space available
• It should consume low power
• It should be easy to maintain
• It should be possible to get returns too

Yansons after studying the needs have developed system which covers all the points. Systems are generally tailored to meet the needs. All the conditions are met with advantages to all.

Centrifugal Fans & Blowers
this is one equipment which gives motion to air. A rotor is made to rotate inside a compartment suitably, which disturbs the air stream and air comes out. Blowers could be designed for exact needs of air, be it volume based or pressure based or both. It could be metal or plastic fabricated. Yansons have designed many types of blowers and fans to meet specific needs.